OFFICE ADD: NO. 416 ZHOUSHI RD,PUDONG,SHANGHAI
FACTORY ADD: INDUSTRIAL PARK, CHANGSHU, JIANGSU,
Email : firstname.lastname@example.org
Grab, we are very familiar with the term, large-scale equipment can be used to grab this model is a good choice, Xiaobian here for everyone to talk about the main points of the grab machine.
1, the lifting and lowering of the grab system:
The system consists of 25 horsepower pneumatic motor, reducer reel, brake, suspension device, wire rope and 25 horsepower air intake pipe and other components, one end of the wire rope fixed on the arm, the other end bypassing the grab pulley and Fixed pulley, and then along the arm up, through the two pulleys, and finally fixed on the reel, when the 25-horsepower air-driven air-driven gear reducer drive drum rotation, to achieve lifting and lowering action.
Brake and pneumatic machine work together, when the air motor is connected, the brake air cylinder at the same time connected to the compressed air into the brake cylinder to promote the piston movement, the brake belt release, brake wheel free rotation. On the contrary, when the pneumatic machine stops rotating, the tension of the brake belt spring tension and brake, so as to ensure that the grapple can be stopped at any height. Mechanical grab
2, grapple grab the material and the expected material working system
The gripper is suspended from the top of the boom by a wire rope. The grab valve is installed on the left side of the driver's cab. The gripper is made up of 8 grippers, 9 rods, ear plates, cylinder piston mechanism and suspension Institutions. Grab the intake pipe and the rack outlet pipe. Grab control pipe directly connected to the operating valve, grab the work to control the distribution valve with the control valve can open the closure of the grab in order to achieve grasping material or material work.